AP Statistics Curriculum 2007 GLM MultLin

From Socr

(Difference between revisions)
Jump to: navigation, search
Line 114: Line 114:
====2011 Best Jobs in the US====
Repeat the multiliniear regression analysis using hte [[SOCR_Data_2011_US_JobsRanking| Ranking Dataset of the Best and Worst USA Jobs for 2011]].

Revision as of 16:45, 4 March 2011


General Advance-Placement (AP) Statistics Curriculum - Multiple Linear Regression

In the previous sections, we saw how to study the relations in bivariate designs. Now we extend that to any finite number of variables (multivariate case).

Multiple Linear Regression

We are interested in determining the linear regression, as a model, of the relationship between one dependent variable Y and many independent variables Xi, i = 1, ..., p. The multilinear regression model can be written as

Y = \beta_0  + \beta_1 X_1 + \beta_2 X_2 +  \cdots +\beta_p X_p + \varepsilon, where \varepsilon is the error term.

The coefficient β0 is the intercept ("constant" term) and βis are the respective parameters of the p independent variables. There are p+1 parameters to be estimated in the multilinear regression.

  • Multilinear vs. non-linear regression: This multilinear regression method is "linear" because the relation of the response (the dependent variable Y) to the independent variables is assumed to be a linear function of the parameters βi. Note that multilinear regression is a linear modeling technique not because that the graph of Y = β0 + βx is a straight line nor because Y is a linear function of the X variables. But the "linear" term refers to the fact that Y can be considered a linear function of the parameters ( βi), even though it is not a linear function of X. Thus, any model like
Y = \beta_o + \beta_1 x + \beta_2 x^2 + \varepsilon
is still one of the linear regression, that is, linear in x and x2 respectively, even though the graph on x by itself is not a straight line.

Parameter Estimation in Multilinear Regression

A multilinear regression with p coefficients and the regression intercept β0 and n data points (sample size), with n\geq (p+1) allows construction of the following vectors and matrix with associated standard errors:

 \begin{bmatrix} y_{1} \\ y_{2} \\ \vdots \\ y_{n} \end{bmatrix} = \begin{bmatrix} 1 & x_{11} & x_{12} & \dots & x_{1p} \\ 1 & x_{21} & x_{22} & \dots & x_{2p} \\ \vdots & \vdots & \vdots & & \vdots \\ 1 & x_{n1} & x_{n2} & \dots & x_{np} \end{bmatrix} \begin{bmatrix} \beta_0 \\ \beta_1 \\ \vdots \\ \beta_p \end{bmatrix} + \begin{bmatrix} \varepsilon_1\\ \varepsilon_2\\ \vdots\\ \varepsilon_n \end{bmatrix}

or, in vector-matrix notation

 \ y =  \mathbf{X}\cdot\beta + \varepsilon.\,

Each data point can be given as (\vec x_i, y_i), i=1,2,\dots,n.. For n = p, standard errors of the parameter estimates could not be calculated. For n less than p, parameters could not be calculated.

  • Point Estimates: The estimated values of the parameters βi are given as
\widehat{\beta} =(\mathbf{X}^T\mathbf{X})^{-1}\mathbf{X}^T {\vec y}
  • Residuals: The residuals, representing the difference between the observations and the model's predictions, are required to analyse the regression and are given by:
\hat\vec\varepsilon = \vec y - \mathbf{X} \hat\beta\,

The standard deviation, \hat \sigma for the model is determined from

 {\hat \sigma  = \sqrt{ \frac {\hat\vec\varepsilon^T \hat\vec\varepsilon} {n-p-1}} = \sqrt {\frac{{  \vec y^T  \vec y -   \hat\vec\beta^T \mathbf{X}^T   \vec y}}{{n - p - 1}}} }

The variance in the errors is Chi-square distributed:

\frac{(n-p-1)\hat\sigma^2}{\sigma^2} \sim \chi_{n-p-1}^2
  • Interval Estimates: The 100(1 − α)% confidence interval for the parameter, βi, is computed as follows:
 {\widehat \beta_i  \pm t_{\frac{\alpha }{2},n - p - 1} \hat \sigma \sqrt {(\mathbf{X}^T \mathbf{X})_{ii}^{ - 1} } }  ,

where t follows the Student's t-distribution with np − 1 degrees of freedom and  (\mathbf{X}^T \mathbf{X})_{ii}^{ - 1} denotes the value located in the ith row and column of the matrix.

The regression sum of squares (or sum of squared residuals) SSR (also commonly called RSS) is given by:

 {\mathit{SSR} = \sum {\left( {\hat y_i  - \bar y} \right)^2 }  =   \hat\beta^T \mathbf{X}^T   \vec y - \frac{1}{n}\left( {  \vec y^T   \vec u  \vec u^T   \vec y} \right)}  ,

where  \bar y = \frac{1}{n} \sum y_i and   \vec u is an n by 1 unit vector (i.e. each element is 1). Note that the terms yTu and uTy are both equivalent to \sum y_i, and so the term \frac{1}{n} y^T u u^T y is equivalent to \frac{1}{n}\left(\sum y_i\right)^2.

The error (or explained) sum of squares (ESS) is given by:

 {\mathit{ESS} = \sum {\left( {y_i  - \hat y_i } \right)^2 }  =   \vec y^T   \vec y -   \hat\beta^T \mathbf{X}^T   \vec y}.

The total sum of squares (TSS) is given by

 {\mathit{TSS} = \sum {\left( {y_i  - \bar y} \right)^2 }  =   \vec y^T   \vec y - \frac{1}{n}\left( {  \vec y^T   \vec u  \vec u^T   \vec y} \right) = \mathit{SSR}+ \mathit{ESS}}.

Partial Correlations

For a given linear model

Y = \beta_0  + \beta_1 X_1 + \beta_2 X_2 +  \cdots +\beta_p X_p + \varepsilon

the partial correlation between X1 and Y given a set of p-1 controlling variables Z = \{X_2, X_3, \cdots, X_p\}, denoted by \rho_{YX_1|Z}, is the correlation between the residuals RX and RY resulting from the linear regression of X with Z and that of Y with Z, respectively. The first-order partial correlation is just the difference between a correlation and the product of the removable correlations divided by the product of the coefficients of alienation of the removable correlations.

  • Partial correlation coefficients for three variables is calculated from the pairwise simple correlations.
If, Y = \beta_0  + \beta_1 X_1 + \beta_2 X_2 + \varepsilon,
then the partial correlation between Y and X2, adjusting for X1 is:
\rho_{YX_2|X_1} = \frac{\rho_{YX_2} - \rho_{YX_1}\times \rho_{X_2X_1}}{\sqrt{1- \rho_{YX_1}^2}\sqrt{1-\rho_{X_2X_1}^2}}
  • In general, the sample partial correlation is
\hat{\rho}_{XY\cdot\mathbf{Z}}=\frac{N\sum_{i=1}^N r_{X,i}r_{Y,i}-\sum_{i=1}^N r_{X,i}\sum r_{Y,i}}
{\sqrt{N\sum_{i=1}^N r_{X,i}^2-\left(\sum_{i=1}^N r_{X,i}\right)^2}~\sqrt{N\sum_{i=1}^N r_{Y,i}^2-\left(\sum_{i=1}^N r_{Y,i}\right)^2}}, where the residuals rX,i and rX,i are given by:
r_{X,i} = x_i - \langle\mathbf{w}_X^*,\mathbf{z}_i \rangle
r_{Y,i} = y_i - \langle\mathbf{w}_Y^*,\mathbf{z}_i \rangle,
with xi, yi and zi denoting the random (IID) samples of some joint probability distribution over X, Y and Z.

Computing the partial correlations

The nth-order partial correlation (|Z| = n) can be computed from three (n - 1)th-order partial correlations. The 0th-order partial correlation \rho_{YX|\empty} is defined to be the regular correlation coefficient ρYX.

For any Z_0 \in \mathbf{Z}:

\rho_{XY| \mathbf{Z} } =
        \frac{\rho_{XY| \mathbf{Z}\setminus\{Z_0\}} - \rho_{XZ_0| \mathbf{Z}\setminus\{Z_0\}}\rho_{YZ_0 | \mathbf{Z}\setminus\{Z_0\}}}
             {\sqrt{1-\rho_{XZ_0 |\mathbf{Z}\setminus\{Z_0\}}^2} \sqrt{1-\rho_{YZ_0 | \mathbf{Z}\setminus\{Z_0\}}^2}}.

Implementing this computation recursively yields an exponential time complexity.

Note in the case where Z is a single variable, this reduces to:

\rho_{XY | Z } =
        \frac{\rho_{XY} - \rho_{XZ}\rho_{YZ}}
             {\sqrt{1-\rho_{XZ}^2} \sqrt{1-\rho_{YZ}^2}}.


We now demonstrate the use of SOCR Multilinear regression applet to analyze multivariate data.

Earthquake Modeling

This is an example where the relation between variables may not be linear or explanatory. In the simple linear regression case, we were able to compute by hand some (simple) examples. Such calculations are much more involved in the multilinear regression situations. Thus we demonstrate multilinear regression only using the SOCR Multiple Regression Analysis Applet.

Use the SOCR California Earthquake dataset to investigate whether Earthquake magnitude (dependent variable) can be predicted by knowing the longitude, latitude, distance and depth of the quake. Clearly, we do not expect these predictors to have a strong effect on the earthquake magnitude, so we expect the coefficient parameters not to be significantly distinct from zero (null hypothesis). SOCR Multilinear regression applet reports this model:

Magnitude = \beta_o + \beta_1\times Close+ \beta_2\times Depth+ \beta_3\times Longitude+ \beta_4\times Latitude + \varepsilon.
Magnitude = 2.320 + 0.001\times Close -0.003\times Depth -0.035\times Longitude -0.028\times Latitude + \varepsilon.

Multilinear Regression on Consumer Price Index

Using the SOCR Consumer Price Index Dataset we can explore the relationship between the prices of various products and commodities. For example, regressing Gasoline on the following three predictor prices: Orange Juice, Fuel and Electricity illustrates significant effects of all these variables as significant explanatory prices (at α = 0.05) for the cost of Gasoline between 1981 and 2006.

Gasoline = 0.083 -0.190\times Orange +0.793\times Fuel +0 .013\times Electricity

2011 Best Jobs in the US

Repeat the multiliniear regression analysis using hte Ranking Dataset of the Best and Worst USA Jobs for 2011.


Translate this page:









الامارات العربية المتحدة


इस भाषा में









Česká republika





Personal tools