# AP Statistics Curriculum 2007 Normal Prob

(Difference between revisions)
 Revision as of 21:48, 31 January 2008 (view source)IvoDinov (Talk | contribs) (→General Normal Distribution)← Older edit Current revision as of 15:48, 3 May 2013 (view source)IvoDinov (Talk | contribs) m (→Assessing Normality) (26 intermediate revisions not shown) Line 1: Line 1: - ==[[AP_Statistics_Curriculum_2007 | General Advance-Placement (AP) Statistics Curriculum]] - Nonstandard Normal Distribution & Experiments: Finding Probabilities== + ==[[AP_Statistics_Curriculum_2007 | General Advance-Placement (AP) Statistics Curriculum]] - Non-Standard Normal Distribution and Experiments: Finding Probabilities== - Due to the [[AP_Statistics_Curriculum_2007_Limits_CLT |Central Limit Theorem]], the normal distribution is perhaps the most important model for studying various quantitative phenomena. Many numerical measurements (e.g., weight, time, etc.) can be well approximated by the normal distribution. While the mechanisms underlying natural processes may often be unknown, the use of the normal model can be theoretically justified by assuming that many small, independent effects are additively contributing to each observation. + Due to the [[AP_Statistics_Curriculum_2007_Limits_CLT |Central Limit Theorem]], the Normal Distribution is perhaps the most important model for studying various quantitative phenomena. Many numerical measurements (e.g., weight, time, etc.) can be well approximated by the normal distribution. While the mechanisms underlying natural processes may often be unknown, the use of the normal model can be theoretically justified by assuming that many small, independent effects are additively contributing to each observation. === General Normal Distribution=== === General Normal Distribution=== - The (general) normal distribution is a continuous distribution that has similar exact ''areas'', bound in terms of its mean, like the [[AP_Statistics_Curriculum_2007#The_Standard_Normal_Distribution |Standard Normal distribution]] and the x-axis on the symmetric intervals around the origin: + The (general) Normal Distribution, $N(\mu, \sigma^2)$, where $\mu$ is the mean and $\sigma^2$ is the variance, is a continuous distribution that has similar exact ''areas'' in terms of symmetric intervals around the origin on x-axis, relative to its mean and variance, as the [[AP_Statistics_Curriculum_2007_Normal_Std |Standard Normal Distribution]]: * The area: $\mu -\sigma < x < \mu+\sigma = 0.8413 - 0.1587 = 0.6826$ * The area: $\mu -\sigma < x < \mu+\sigma = 0.8413 - 0.1587 = 0.6826$ * The area: $\mu -2\sigma < x < \mu+2\sigma = 0.9772 - 0.0228 = 0.9544$ * The area: $\mu -2\sigma < x < \mu+2\sigma = 0.9772 - 0.0228 = 0.9544$ * The area: $\mu -3\sigma < x < \mu +3\sigma= 0.9987 - 0.0013 = 0.9974$ * The area: $\mu -3\sigma < x < \mu +3\sigma= 0.9987 - 0.0013 = 0.9974$ + * Note that the [http://en.wikipedia.org/wiki/Inflection_point inflection points] ($f ''(x)=0$) of the (general) Normal density function are $\pm \sigma$.
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig6.jpg|500px]]
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig6.jpg|500px]]
- * General Normal density function $f(x)= {e^{{-(x-\mu)^2} \over 2\sigma^2} \over \sqrt{2 \pi\sigma^2}}.$ + * General Normal ''density'' function $f(x)= {e^{{-(x-\mu)^2} \over 2\sigma^2} \over \sqrt{2 \pi\sigma^2}}.$ + * General Normal ''cumulative distribution'' function $\Phi(y)= \int_{-\infty}^{y}{{e^{{-(x-\mu)^2} \over 2\sigma^2} \over \sqrt{2 \pi\sigma^2}} dx}.$ - * See the special case of [[AP_Statistics_Curriculum_2007#The_Standard_Normal_Distribution | Standard Normal distribution]] where the mean is set to zero and a variance to one. - ===Experiments=== + * See the special case of [[AP_Statistics_Curriculum_2007#The_Standard_Normal_Distribution | Standard Normal Distribution]] where the mean is set to zero and a variance to one. - TBD + - This [[Help_pages_for_SOCR_Distributions | Distributions help-page may be useful in understanding SOCR Distribution Applet]]. How many batteries, from the sample of 100, can we expect to have? + * The relation between the Standard and the General Normal Distribution is provided by these simple linear transformations (Suppose ''X'' denotes General and ''Z'' denotes Standard Normal Random Variables): + : $Z = {X-\mu \over \sigma}$ converts general normal scores to standard (Z) values. + : $X = \mu +Z\times\sigma$ converts standard scores to general normal values. - * Absolute Voltage > 1? P(X>1) = 0.1586, thus we expect 15-16 batteries to have voltage exceeding 1. + ===Examples=== -
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig1.jpg|500px]]
+ - * |Absolute Voltage| > 1? P(|X|>1) = 1- 0.682689=0.3173, thus we expect 31-32 batteries to have absolute voltage exceeding 1. + ====[[SOCR_EduMaterials_Activities_Normal_Probability_examples | A large number of Normal distribution examples using SOCR tools]]==== -
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig2.jpg|500px]]
+ - * Voltage < -2? P(X<-2) = 0.0227, thus we expect 2-3 batteries to have voltage less than -2. + ====Sums and averages of independent Normal random variables==== -
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig3.jpg|500px]]
+ - * Voltage <= -2? P(X<=-2) = 0.0227, thus we expect 2-3 batteries to have voltage less than or equal to -2. + * Let X1, X2, and X3 represent the heights of 3 random individuals. Suppose the heights are Normally distributed with mean 170cm and standard deviation 20 cm (i.e., X1, X2, X3 ~N(\mu=170, \sigma=20)[/itex]. ''What is the probability that the total sum T=X1+X2+X3 is less than 500cm? That is, find P(T<500)''. As the [[AP_Statistics_Curriculum_2007_Limits_CLT|X variables are Normal and independent, the total sum, T, will be Normal]](\mu_T, \sigma_T[/itex]) and we need to find the parameters $\mu_T, \sigma_T$. -
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig3.jpg|500px]]
+ ** $\mu_T=E(T)=E(X1+X2+X3) = E(X1)+E(X2)+E(X3)=3\times 170=510.$ - * -1.7537 < Voltage < 0.8465? P(-1.7537 < X < 0.8465) = 0.761622, thus we expect 76 batteries to have voltage in this range. + ** $\sigma_T^2 = Var(T) = Var(X1+X2+X3)=Var(X1)+Var(X2)+Var(X3)=$$20^2+20^2+20^2=1,200$, and $\sigma_T=\sqrt{1,200}=34.64.$ -
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig4.jpg|500px]]
+ ** Thus, T~$N(\mu_T=510,\sigma_T=34.64)$, and P(T<500)= 0.386380, which can be computed using the [http://socr.ucla.edu/htmls/dist/Normal_Distribution.html SOCR Normal Distribution Calculator] or the [http://socr.ucla.edu/Applets.dir/Z-table.html SOCR Standard Normal Z Table] via the standardizing transformation. + + * If A is the average of the 3 heights, A=(X1+X2+X3)/3, ''what is the central 50-th percentile for the variable A''? That is, what are the lower (a1) and upper (a2) bounds that give P(a1[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig7.jpg|500px]] + + * If ''normal SBP'' is defined by the range [110 ; 140], and we take a random sample of 1,000 commuters and measure their SBP, how many would be expected to have ''normal SBP''? (Number = 1,000P(110[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig8.jpg|500px]] + + * What is the 90th percentile for the SBP? That is what is $x_o$, so that $P(X[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig9.jpg|500px]] + + * What is the range of SBP values that contain the central 80% of the SBPs for all commuters? That is what are [itex]x_o, x_1$, so that [itex]P(x_0[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig10.jpg|500px]] + + ===Assessing Normality=== + How can we tell if data collected from a process or experiment we observe is normally distributed? There are several methods for ''checking normality'': + * Symmetry: Are the [[AP_Statistics_Curriculum_2007_EDA_Center |mean and median]] of the dataset equal (Mean = Median)? Use the [[AP_Statistics_Curriculum_2007_Distrib_MeanVar#Notable_Moments | skewness measure]]. + * Flatness: Is the data distribution as flat as the Normal distribution? Use the [[AP_Statistics_Curriculum_2007_Distrib_MeanVar#Notable_Moments |kurtosis measure]]. + * Check the data [[SOCR_EduMaterials_Activities_Histogram_Graphs | histogram]], [[SOCR_EduMaterials_Activities_BoxPlot | box-and-whisker]] and [[SOCR_EduMaterials_Activities_DotChart |dotplot]] for bias (skewness), asymmetry, outliers, etc. + * Empirical Rule - check the percent of data that falls within 1, 2 and 3 [[AP_Statistics_Curriculum_2007_EDA_Var | SD]]s from the mean (should be approximately 68%, 95% and 99.7%). + * Or we can do a [[SOCR_EduMaterials_Activities_QQChart |Quantile-Quantile Probability plot]] comparing the quantiles of the data against their Normal distribution counterparts. +
[[Image:SOCR_EBook_Dinov_RV_Normal_013108_Fig11.jpg|500px]]
+ + * ''Why do we care if the data is normally distributed? Having evidence that the data we are analyzing is normally distributed allows us to use the (General) Normal distribution as a model to calculate the probabilities of various events and assess significant observations.'' + + * Example: Suppose we are given the heights for 11 women. + ** First we need to show that there is no evidence suggesting that the Normal and Data distributions are significantly distinct. + ** Then, we want to use the normal distribution to make inference on women heights. If the height of a randomly chosen woman is measured, how likely is that she'll be taller than 60 inches? 70 inches? Between 55 and 65 inches? +
+ {| class="wikitable" style="text-align:center; width:75%" border="1" + |- + | Height (in.)  || 61.0 || 62.5 || 63.0 || 64.0 || 64.5 || 65.0 || 66.5 || 67.0 || 68.0 || 68.5 || 70.5 + |}
+ + * [http://en.wikipedia.org/wiki/Standard_normal_distribution#Normality_tests There are also a number of quantitative methods (statistical tests) to assess normality]. + + ===[[EBook_Problems_Normal_Prob|Problems]]===

+ ===References=== ===References=== + * [[SOCR_EduMaterials_Activities_Histogram_Graphs | Histogram Plots]] + * [[SOCR_EduMaterials_Activities_BoxPlot | Box-and-Whisker Plots]] + * [[SOCR_EduMaterials_Activities_DotChart |Dotplot]] + * [[SOCR_EduMaterials_Activities_QQChart |Quantile-Quantile Probability Plot]]

## General Advance-Placement (AP) Statistics Curriculum - Non-Standard Normal Distribution and Experiments: Finding Probabilities

Due to the Central Limit Theorem, the Normal Distribution is perhaps the most important model for studying various quantitative phenomena. Many numerical measurements (e.g., weight, time, etc.) can be well approximated by the normal distribution. While the mechanisms underlying natural processes may often be unknown, the use of the normal model can be theoretically justified by assuming that many small, independent effects are additively contributing to each observation.

### General Normal Distribution

The (general) Normal Distribution, N(μ,σ2), where μ is the mean and σ2 is the variance, is a continuous distribution that has similar exact areas in terms of symmetric intervals around the origin on x-axis, relative to its mean and variance, as the Standard Normal Distribution:

• The area: μ − σ < x < μ + σ = 0.8413 − 0.1587 = 0.6826
• The area: μ − 2σ < x < μ + 2σ = 0.9772 − 0.0228 = 0.9544
• The area: μ − 3σ < x < μ + 3σ = 0.9987 − 0.0013 = 0.9974
• Note that the inflection points (f''(x) = 0) of the (general) Normal density function are $\pm \sigma$.
• General Normal density function $f(x)= {e^{{-(x-\mu)^2} \over 2\sigma^2} \over \sqrt{2 \pi\sigma^2}}.$
• General Normal cumulative distribution function $\Phi(y)= \int_{-\infty}^{y}{{e^{{-(x-\mu)^2} \over 2\sigma^2} \over \sqrt{2 \pi\sigma^2}} dx}.$

• The relation between the Standard and the General Normal Distribution is provided by these simple linear transformations (Suppose X denotes General and Z denotes Standard Normal Random Variables):
$Z = {X-\mu \over \sigma}$ converts general normal scores to standard (Z) values.
$X = \mu +Z\times\sigma$ converts standard scores to general normal values.

### Examples

#### Sums and averages of independent Normal random variables

• Let X1, X2, and X3 represent the heights of 3 random individuals. Suppose the heights are Normally distributed with mean 170cm and standard deviation 20 cm (i.e., X1, X2, X3 ~N(μ = 170,σ = 20). What is the probability that the total sum T=X1+X2+X3 is less than 500cm? That is, find P(T<500). As the X variables are Normal and independent, the total sum, T, will be Normal(μTT) and we need to find the parameters μTT.
• $\mu_T=E(T)=E(X1+X2+X3) = E(X1)+E(X2)+E(X3)=3\times 170=510.$
• $\sigma_T^2 = Var(T) = Var(X1+X2+X3)=Var(X1)+Var(X2)+Var(X3)=$202 + 202 + 202 = 1,200, and $\sigma_T=\sqrt{1,200}=34.64.$
• Thus, T~NT = 510,σT = 34.64), and P(T<500)= 0.386380, which can be computed using the SOCR Normal Distribution Calculator or the SOCR Standard Normal Z Table via the standardizing transformation.
• If A is the average of the 3 heights, A=(X1+X2+X3)/3, what is the central 50-th percentile for the variable A? That is, what are the lower (a1) and upper (a2) bounds that give P(a1<A<a2)=0.5, where a1 and a2 are symmetric with respect to the expected value of A, E(A) = μ = 170)?
• Note that it suffices to find one of the bounds (say a2) as these bounds are symmetric around the mean, 170. Thus, we are looking for a2, such that P(170<A<a2)=0.25, which is also the same as P(a1<A<170)=0.25.
• The distribution of the average A~N(μ = 170,σ).
• Var(A) = Var((1 / 3)(X1 + X2 + X3)) = (1 / 9)(Var(X1) + Var(X2) + Var(X3)) = (1 / 9)(202 + 202 + 202) = 133.33, and σ = 11.55. Thus, A~N(μ = 170,σ = 11.55).
• As before, we can the SOCR Normal Distribution Calculator or the SOCR Standard Normal Z Table via the standardizing transformation to compute a2=177.8, and a1 = μ − (a2 − μ) = 162.2, as P(162.2<A<170)=P(170<A<177.8)=0.25.
• Therefore, the central 50-th percentile for the average height is [162.2 : 177.8].

#### Systolic Arterial Pressure Example

Suppose that the average systolic blood pressure (SBP) for a Los Angeles freeway commuter follows a Normal distribution with mean 130 mmHg and standard deviation 20 mmHg. Denote X to be the random variable representing the SBP measure for a randomly chosen commuter. Then $X\sim N(\mu=130, \sigma^2 =20^2)$.

• Find the percentage of LA freeway commuters that have a SBP less than 100. That is compute the following probability: p=P(X<100)=? (p=0.066776)
• If normal SBP is defined by the range [110 ; 140], and we take a random sample of 1,000 commuters and measure their SBP, how many would be expected to have normal SBP? (Number = 1,000P(110<X<140)= 1,000*0.532807=532.807).
• What is the 90th percentile for the SBP? That is what is xo, so that P(X < xo) = 0.9?
• What is the range of SBP values that contain the central 80% of the SBPs for all commuters? That is what are xo,x1, so that P(x0 < X < x1) = 0.8 and ${x_o+x_1\over2}=\mu=130$ (i.e., they are symmetric around the mean)? (xo = 104,x1 = 156)

### Assessing Normality

How can we tell if data collected from a process or experiment we observe is normally distributed? There are several methods for checking normality:

• Why do we care if the data is normally distributed? Having evidence that the data we are analyzing is normally distributed allows us to use the (General) Normal distribution as a model to calculate the probabilities of various events and assess significant observations.
• Example: Suppose we are given the heights for 11 women.
• First we need to show that there is no evidence suggesting that the Normal and Data distributions are significantly distinct.
• Then, we want to use the normal distribution to make inference on women heights. If the height of a randomly chosen woman is measured, how likely is that she'll be taller than 60 inches? 70 inches? Between 55 and 65 inches?
 Height (in.) 61 62.5 63 64 64.5 65 66.5 67 68 68.5 70.5