Introduction to Normal Distribution

From Socr

(Difference between revisions)
Jump to: navigation, search
 
Line 4: Line 4:
You should see something like this:
You should see something like this:
-
[[Image:normalsnap1.jpg|400px]]
+
 
 +
<center>[[Image:normalsnap1.jpg|400px]]</center>
 +
 
*  This is the standard normal distribution.  In this distribution, the mean, median, and mode all appear at the center.  Half of the data falls into the left side of the center and half falls into the right side.
*  This is the standard normal distribution.  In this distribution, the mean, median, and mode all appear at the center.  Half of the data falls into the left side of the center and half falls into the right side.
Line 11: Line 13:
*  Try typing -50 in the left cutoff box and 50 in the right cutoff box.  You must hit "Enter" after you type in each value.  This represents the area between -1 standard deviation and +1 standard deviation.  You should see something like this:
*  Try typing -50 in the left cutoff box and 50 in the right cutoff box.  You must hit "Enter" after you type in each value.  This represents the area between -1 standard deviation and +1 standard deviation.  You should see something like this:
-
[[Image:normalsnap2.jpg|400px]]
+
 
 +
<center>[[Image:normalsnap2.jpg|400px]]</center>
 +
 
*  Notice in the green box below the graph there are several values listed.  It says Between: .682689.  This means that about 68.27% of the data lies between -1 and +1 standard deviations.
*  Notice in the green box below the graph there are several values listed.  It says Between: .682689.  This means that about 68.27% of the data lies between -1 and +1 standard deviations.
Line 18: Line 22:
*  Now set the left cutoff at -100 and the right at 100.  Don't forget to hit Enter after you change your data!  Here's what you will see:
*  Now set the left cutoff at -100 and the right at 100.  Don't forget to hit Enter after you change your data!  Here's what you will see:
-
[[Image:normalsnap3.jpg|400px]]
+
 
 +
<center>[[Image:normalsnap3.jpg|400px]]</center>

Current revision as of 18:41, 8 August 2007

  • Go to www.socr.ucla.edu
  • Click the "Distributions" tab
  • In the drop-down menu on the left, select Normal Distribution

You should see something like this:



  • This is the standard normal distribution. In this distribution, the mean, median, and mode all appear at the center. Half of the data falls into the left side of the center and half falls into the right side.
  • In the picture above, the distribution has a mean of 0, and a standard deviation of 50.
  • If you scroll down, you will see a box labeled "Left Cut Off" and another labeled "Right Cut Off." You can use these to find what percent of the values fall between certain values.
  • Try typing -50 in the left cutoff box and 50 in the right cutoff box. You must hit "Enter" after you type in each value. This represents the area between -1 standard deviation and +1 standard deviation. You should see something like this:



  • Notice in the green box below the graph there are several values listed. It says Between: .682689. This means that about 68.27% of the data lies between -1 and +1 standard deviations.
  • It also lists how much of the data lies to the left of -1 standard deviation and to the right of +1 standard deviation.
  • Now set the left cutoff at -100 and the right at 100. Don't forget to hit Enter after you change your data! Here's what you will see:



My Activities





Translate this page:

(default)

Deutsch

Español

Français

Italiano

Português

日本語

България

الامارات العربية المتحدة

Suomi

इस भाषा में

Norge

한국어

中文

繁体中文

Русский

Nederlands

Ελληνικά

Hrvatska

Česká republika

Danmark

Polska

România

Sverige

Personal tools